Bendsøe,
M. P.
, and
Kikuchi,
N.
, 1988, “
Generating Optimal Topologies in Structural Design Using a Homogenization Method,” Comput. Methods Appl. Mech. Eng.,
71(2), pp. 197–224.

Dede,
E. M.
,
Joshi,
S. N.
, and
Zhou,
F.
, 2015, “
Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink,” ASME J. Mech. Des.,
137(11), p. 111403.

Zegard,
T.
, and
Paulino,
G. H.
, 2016, “
Bridging Topology Optimization and Additive Manufacturing,” Struct. Multidiscip. Optim.,
53(1), pp. 175–192.

Zhu,
B.
,
Skouras,
M.
,
Chen,
D.
, and
Matusik,
W.
, 2017, “
Two-Scale Topology Optimization With Microstructures,” ACM Trans. Graph.,
36(4). p. 164.

Vogiatzis,
P.
,
Chen,
S.
, and
Zhou,
C.
, 2017, “
An Open Source Framework for Integrated Additive Manufacturing and Level-Set-Based Topology Optimization,” ASME J. Comput. Inf. Sci. Eng.,
17(4), p. 041012.

Steuben,
J. C.
,
Iliopoulos,
A. P.
, and
Michopoulos,
J. G.
, 2018, “
Multiscale Topology Optimization for Additively Manufactured Objects,” ASME J. Comput. Inf. Sci. Eng.,
18(3), p. 031002.

Luo,
L.
,
Baran,
I.
,
Rusinkiewicz,
S.
, and
Matusik,
W.
, 2012, “
Chopper: Partitioning Models Into 3D-Printable Parts,” ACM Trans. Graph.,
31(6), pp. 129:1–129:9.

Attene,
M.
, 2015, “
Shapes in a Box: Disassembling 3D Objects for Efficient Packing and Fabrication,” Comput. Graph. Forum,
34(8), pp. 64–76.

Turner,
B. N.
,
Strong,
R.
, and
Gold,
S. A.
, 2014, “
A Review of Melt Extrusion Additive Manufacturing Processes—Part I: Process Design and Modeling,” Rapid Prototyping J.,
20(3), pp. 192–204.

Liu,
S.
,
Li,
Q.
,
Chen,
W.
,
Tong,
L.
, and
Cheng,
G.
, 2015, “
An Identification Method for Enclosed Voids Restriction in Manufacturability Design for Additive Manufacturing Structures,” Front. Mech. Eng.,
10(2), pp. 126–137.

Li,
Q.
,
Chen,
W.
,
Liu,
S.
, and
Tong,
L.
, 2016, “
Structural Topology Optimization Considering Connectivity Constraint,” Struct. Multidiscip. Optim.,
54(4), pp. 971–984.

Ambrosio,
L.
, and
Buttazzo,
G.
, 1993, “
An Optimal Design Problem With Perimeter Penalization,” Calculus Var. Partial Differ. Equations,
1(1), pp. 55–69.

Haber,
R. B.
,
Jog,
C. S.
, and
Bendsøe,
M. P.
, 1996, “
A New Approach to Variable-Topology Shape Design Using a Constraint on Perimeter,” Struct. Multidiscip. Optim.,
11(1–2), pp. 1–12.

Petersson,
J.
, and
Sigmund,
O.
, 1998, “
Slope Constrained Topology Optimization,” Int. J. Numer. Methods Eng.,
41(8), pp. 1417–1434.

Sigmund,
O.
, 1997, “
On the Design of Compliant Mechanisms Using Topology Optimization,” J. Struct. Mech.,
25(4), pp. 493–524.

Bruns,
T. E.
, and
Tortorelli,
D. A.
, 2001, “
Topology Optimization of Non-Linear Elastic Structures and Compliant Mechanisms,” Comput. Methods Appl. Mech. Eng.,
190(26–27), pp. 3443–3459.

Guest,
J. K.
,
Prévost,
J. H.
, and
Belytschko,
T.
, 2004, “
Achieving Minimum Length Scale in Topology Optimization Using Nodal Design Variables and Projection Functions,” Int. J. Numer. Methods Eng.,
61(2), pp. 238–254.

Lazarov,
B. S.
, and
Sigmund,
O.
, 2011, “
Filters in Topology Optimization Based on Helmholtz-Type Differential Equations,” Int. J. Numer. Methods Eng.,
86(6), pp. 765–781.

Thomsen,
J.
, 1992, “
Topology Optimization of Structures Composed of One or Two Materials,” Struct. Optim.,
5(1–2), pp. 108–115.

Sigmund,
O.
, 2001, “
Design of Multiphysics Actuators Using Topology Optimization—Part II: Two-Material Structures,” Comput. Methods Appl. Mech. Eng.,
190(49–50), pp. 6605–6627.

Stegmann,
J.
, and
Lund,
E.
, 2005, “
Discrete Material Optimization of General Composite Shell Structures,” Int. J. Numer. Methods Eng.,
62(14), pp. 2009–2027.

Zuo,
W.
, and
Saitou,
K.
, 2017, “
Multi-Material Topology Optimization Using Ordered SIMP Interpolation,” Struct. Multidiscip. Optim.,
55(2), pp. 477–491.

Lyu,
N.
, and
Saitou,
K.
, 2005, “
Topology Optimization of Multicomponent Beam Structure Via Decomposition-Based Assembly Synthesis,” ASME J. Mech. Des.,
127(2), pp. 170–183.

Yildiz,
A. R.
, and
Saitou,
K.
, 2011, “
Topology Synthesis of Multicomponent Structural Assemblies in Continuum Domains,” ASME J. Mech. Des.,
133(1), p. 011008.

Guirguis,
D.
,
Hamza,
K.
,
Aly,
M.
,
Hegazi,
H.
, and
Saitou,
K.
, 2015, “
Multi-Objective Topology Optimization of Multi-Component Continuum Structures Via a Kriging-Interpolated Level Set Approach,” Struct. Multidiscip. Optim.,
51(3), pp. 733–748.

Rozvany,
G. I.
, 2009, “
A Critical Review of Established Methods of Structural Topology Optimization,” Struct. Multidiscip. Optim.,
37(3), pp. 217–237.

Sigmund,
O.
, 2011, “
On the Usefulness of Non-Gradient Approaches in Topology Optimization,” Struct. Multidiscip. Optim.,
43(5), pp. 589–596.

Zhou,
Y.
, and
Saitou,
K.
, 2018, “
Gradient-Based Multi-Component Topology Optimization for Stamped Sheet Metal Assemblies (MTO-S),” Struct. Multidiscip. Optim.,
58(1), pp. 83–94.

Zhou,
Y.
,
Nomura,
T.
, and
Saitou,
K.
, 2018, “
Multi-Component Topology and Material Orientation Design of Composite Structures (MTO-C),” Comput. Methods Appl. Mech. Eng.,
342, pp. 438–457.

Formlab, 2016, “
How to Create Models Larger Than a 3D Printer's Build Volume,” Formlab, accessed Dec. 15, 2018,

https://goo.gl/9mz1Zb
Zhou,
Y.
, and
Saitou,
K.
, 2017, “
Gradient-Based Multi-Component Topology Optimization for Additive Manufacturing (MTO-A),” ASME Paper No. DETC2017-68207.

Kawamoto,
A.
,
Matsumori,
T.
,
Yamasaki,
S.
,
Nomura,
T.
,
Kondoh,
T.
, and
Nishiwaki,
S.
, 2011, “
Heaviside Projection Based Topology Optimization by a PDE-Filtered Scalar Function,” Struct. Multidiscip. Optim.,
44(1), pp. 19–24.

Bendsøe,
M. P.
, and
Sigmund,
O.
, 2004, Topology Optimization Theory, Methods, and Applications,
Springer, Berlin.

O'Rourke,
J.
, 1985, “
Finding Minimal Enclosing Boxes,” Int. J. Comput. Inf. Sci.,
14(3), pp. 183–199.

Barequet,
G.
, and
Har-Peled,
S.
, 2001, “
Efficiently Approximating the Minimum-Volume Bounding Box of a Point Set in Three Dimensions,” J. Algorithms,
38(1), pp. 91–109.

Chan,
C.
, and
Tan,
S.
, 2001, “
Determination of the Minimum Bounding Box of an Arbitrary Solid: An Iterative Approach,” Comput. Struct.,
79(15), pp. 1433–1449.

Dimitrov,
D.
,
Knauer,
C.
,
Kriegel,
K.
, and
Rote,
G.
, 2009, “
Bounds on the Quality of the PCA Bounding Boxes,” Comput. Geom.,
42(8), pp. 772–789.

Moon,
S. J.
, and
Yoon,
G. H.
, 2013, “
A Newly Developed qp-Relaxation Method for Element Connectivity Parameterization to Achieve Stress-Based Topology Optimization for Geometrically Nonlinear Structures,” Comput. Methods Appl. Mech. Eng.,
265, pp. 226–241.

Svanberg,
K.
, 1987, “
The Method of Moving Asymptotes—A New Method for Structural Optimization,” Int. J. Numer. Methods Eng.,
24(2), pp. 359–373.

Olesen,
L. H.
,
Okkels,
F.
, and
Bruus,
H.
, 2006, “
A High-Level Programming-Language Implementation of Topology Optimization Applied to Steady-State Navier-Stokes Flow,” Int. J. Numer. Methods Eng.,
65(7), pp. 975–1001.

Aage,
N.
,
Andreassen,
E.
, and
Lazarov,
B. S.
, 2015, “
Topology Optimization Using PETSc: An Easy-to-Use, fully Parallel, Open Source Topology Optimization Framework,” Struct. Multidiscip. Optim.,
51(3), pp. 565–572.

Zhou,
Y.
,
Nomura,
T.
, and
Saitou,
K.
, 2018, “
Multi-Component Topology Optimization for Powder Bed Additive Manufacturing (MTO-A),” ASME Paper No. DETC2018-86284.

Brackett,
D.
,
Ashcroft,
I.
, and
Hague,
R.
, 2011, “
Topology Optimization for Additive Manufacturing,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. 8–10, pp. 348–362.

Gaynor,
A. T.
, and
Guest,
J. K.
, 2016, “
Topology Optimization Considering Overhang Constraints: Eliminating Sacrificial Support Material in Additive Manufacturing Through Design,” Struct. Multidiscip. Optim.,
54(5), pp. 1157–1172.

Mirzendehdel,
A. M.
, and
Suresh,
K.
, 2016, “
Support Structure Constrained Topology Optimization for Additive Manufacturing,” Comput.-Aided Des.,
81, pp. 1–13.

Qian,
X.
, 2017, “
Undercut and Overhang Angle Control in Topology Optimization: A Density Gradient Based Integral Approach,” Int. J. Numer. Methods Eng.,
111(3), pp. 247–272.

Langelaar,
M.
, 2017, “
An Additive Manufacturing Filter for Topology Optimization of Print-Ready Designs,” Struct. Multidiscip. Optim.,
55(3), pp. 871–883.

Guo,
X.
,
Zhou,
J.
,
Zhang,
W.
,
Du,
Z.
,
Liu,
C.
, and
Liu,
Y.
, 2017, “
Self-Supporting Structure Design in Additive Manufacturing Through Explicit Topology Optimization,” Comput. Methods Appl. Mech. Eng.,
323, pp. 27–63.

Liu,
P.
,
Luo,
Y.
, and
Kang,
Z.
, 2016, “
Multi-Material Topology Optimization Considering Interface Behavior Via XFEM and Level Set Method,” Comput. Methods Appl. Mech. Eng.,
308, pp. 113–133.