Guest Editorial

Special Issue on Shape and Solid Modeling in Product Development OPEN ACCESS

[+] Author and Article Information
Pere Brunet

 UPC, Barcelona, Spain

Gershon Elber

 Technion, Haifa, Israel

Nicholas M. Patrikalakis

 MIT, Cambridge, MA, USA

Franca Giannini

 CNR, Genoa, Italy

Alexander Pasko

 Hosei University, Tokyo, Japan

J. Comput. Inf. Sci. Eng 5(2), 77-78 (Jun 01, 2005) (2 pages) doi:10.1115/1.1901709 History:

This Special Issue of JCISE includes selected papers that were presented at the IEEE Shape Modeling International Conference (SMI’04) and the Ninth ACM Symposium on Solid Modeling and Applications (SM’04). The conferences were colocated at the Palazzo Ducale, in the historic center of Genoa, Italy in June 2004 as part of the International Convention on Shapes & Solids 2004 organized and chaired by Bianca Falcidieno (CNR, Italy). The Shape Modeling International Conference is an annual international forum for the exchange of research and applications related to all the aspects dealing with modeling, representing, processing and retrieving of digital shapes and associated properties from a broad multidisciplinary perspective. The ACM Symposium on Solid Modeling and Applications is also an annual international forum for the exchange of recent research and applications of solid modeling and computing in design, analysis and manufacturing, as well as in emerging biomedical, geophysical and other areas.

The SMI’04 program cochairs selected 6 papers from a list of 40 papers of the plenary full and short format articles to be included in this issue, based on the papers’ quality and interest for the engineering domain. All papers were revised and reviewed by at least two additional referees for JCISE. Using similar criteria, the SM’04 program cochairs selected 5 papers from the list of 20 plenary full papers presented at the SM’04 symposium. The subjects of the papers reflect the recognition that geometric and solid models have become the primary medium for creating, editing, exchanging, analyzing, and simulating computational models in engineering. As such, the disciplines of geometric and solid modeling now play central roles in computing and information science at large. The selected papers reflect this prominent role of geometric modeling by describing a wide range of impressive advances in the field.

The first six papers in this issue are based on the SMI’04 conference papers. Related to manufacturing processes, the paper Mold Accessibility Via Gauss Map Analysis, by G. Elber, X. Chen and E. Cohen, addresses the problem of defining a valid partition line for a two-piece mold. Unlike most of the previous work in this area, this paper deals also with NURBS models. It demonstrates that a valid solution exists under specific hypotheses for the given object’s topology and surface continuity, and provides a method for its evaluation.

The problem of defining effective and efficient tools for modifying and reusing free form shapes is crucial in CAD applications. Two papers of this special issue deal with different aspects of such a problem by extending the applicability of the feature-based approach to parts that include free-form surfaces. The first paper, titled Fitting and Manipulating Free-Form Shapes Using Templates by Y. Song, J. S. M. Vergeest and W. F. Bronsvoort, focuses on the development of tools for the easy control and modification of existing shapes. This is done by adopting free-form feature templates, which are recognized over existing surfaces, and modifiable through a few intrinsic parameters. The paper Shape Tuning in Fully Free-Form Deformation Features by J. P. Pernot, S. Guillet, J. Leon, B. Falcidieno and F. Giannini, presents a method for deforming and tuning the shape of surface areas in a predictable manner. A formulation of the optimization problem of the adopted deformation method is proposed that permits the establishment of a correlation between the combination of the quantities to be minimized and its meaning in terms of the resulting shape behaviors.

Well known in animation, subdivision surfaces are gaining attention in wider domains. In the paper Detail-Preserving Variational Surface Design With Multiresolution Constraints by I. Boier-Martin, R. Ronfard and F. Bernardini, existing variational modeling methods have been adapted to multiresolution subdivision surfaces showing the capabilities of such a representation scheme for interactive rapid shape prototyping.

The problem of extracting medial axis surface models of thin plate structures from Computed Tomography (CT) data is addressed in the technical note Contouring Medial Surface of Thin Plate Structure Using Local Marching Cubes by T. Fujimori, H. Suzuki and Y. Kobayashi. A new algorithm for contouring a medial surface is described that first extracts the medial cells using a skeletonization method and then applies the Marching Cubes algorithm. The method adjusts the topological connectivity using appropriate cell operations.

The challenging problem of curvature estimation from scanned dense meshes is treated in the technical note Verification of Scanned Engineering Parts with CAD Models Based on Discrete Curvature Estimation by B. Lipshitz and A. Fischer, where a comparison among three of the most well-known methods (the angle based, Taubin’s and Hamman’s) is given.

The next five papers in this issue are based on the SM’04 symposium full plenary papers: Planar Parameterization For Closed Manifold Genus-gMeshes Using Any Type of Positive Weights by D. Steiner and A. Fischer; Fast Continuous Collision Detection for Articulated Models by S. Redon, M. C. Lin, D. Manocha, and Y. J. Kim; Automatic Building of Structured Geological Models by S. Brandel et al. ; Trivariate Simplex Splines for Inhomogeneous Solid Modeling in Engineering Design by J. Hua, Y. He and H. Qin; and Labelling Engineering Line Drawing Using Depth Reasoning by P. A. C. Varley, R. R. Martin and H. Suzuki.

The first paper by Steiner and Fischer addresses the problem of the parametrization of three-dimensional meshes, which has important applications in texture mapping, remeshing as well as morphing of meshes. The second paper by Redon et al.  focuses on the problem of collision detection on a time interval continuum, rather than evaluating collisions at sequences of fixed times. The resulting algorithm has applications in design, simulation, robotics, virtual environments and computer games. The third paper by Brandel et al.  proposes a new method for significantly ameliorating the construction and update of three-dimensional geological models used for hydrocarbon exploration by the oil industry. The fourth paper by Hua et al.  proposes a new method for representing, modeling, creating and rendering complex inhomogeneous solid objects using the trivariate simplex spline method, with applications in design and analysis of heterogeneous objects. The fifth paper by Varley et al.  focuses on the important problem of the automatic generation of boundary representation models of engineered solid objects from line drawings, a problem with significant applications in the design industries.

We hope that JCISE readers will find the papers stimulating and thought provoking. We also hope that, by focusing on the key role of geometric computations in engineering applications and demonstrating the many exciting opportunities for further advances, this issue will encourage you the readers to participate in the future shape and solid modeling conferences. This issue, and indeed the convention itself, became possible only due to the hard work of many individuals. We wish to thank the authors for their willingness to contribute to this special issue, the referees for their thorough reviews under very tight deadlines, the JCISE Editor, Jami Shah, for his support, as well as the ACM, the IEEE and the Eurographics Association for a permitting reprint of some contributions and the inclusion of revised and expanded versions of papers from the convention in this special issue.

Copyright © 2005 by American Society of Mechanical Engineers
This article is only available in the PDF format.






Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In