0
TECHNICAL NOTE

Definition and Review of Virtual Prototyping

[+] Author and Article Information
G. Gary Wang

Dept. of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, MB, R3T 5V6 Canada e-mail: gary_wang@umanitoba.ca

J. Comput. Inf. Sci. Eng 2(3), 232-236 (Jan 02, 2003) (5 pages) doi:10.1115/1.1526508 History: Received May 01, 2001; Revised October 01, 2002; Online January 02, 2003
Copyright © 2002 by ASME
Your Session has timed out. Please sign back in to continue.

References

Gowda, S., Jayaram, S., and Jayaram, U., 1999, “Architectures for Internet-based Collaborative Virtual Prototyping,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9040, Las Vegas, Nevada, September 11–15.
Song, P., Krovi, V., Kumar, V., and Mahoney, R., 1999, “Design and Virtual Prototyping of Human-worn Manipulation Devices,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9029, Las Vegas, Nevada, September 11–15.
Antonino, G. S., and Zachmann, G., 1998, “Integrating Virtual Reality for Virtual Prototyping,” Proceedings of the 1998 ASME Design Technical Conference and Computers in Engineering Conference, DETC98/CIE-5536, Atlanta, Georgia, September 13–16.
Dai, F., and Reindl, P., 1996, “Enabling Digital Mock up with Virtual Reality Techniques—Vision, Concept, Demonstrator,” Proceedings of 1996 ASME design engineering technical conference and computers in engineering, Irvine, California August 18–22.
Zachmann, G., 1997, “Real-time and Exact Collision Detection for Interactive Virtual Prototyping,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4306, Sacramento, California, Atlanta, September 14–17.
Morris, C. (ed.), 1992, Academic Press Dictionary of Science and Technology, Academic Press, Inc., San Diego.
Dai, F., and Göbel, M., 1994, “Virtual Prototyping—An Approach Using VR-technique,” Proceedings of the 1994 ASME Computers in Engineering Conference, Minneapolis, MN, 1994.
Angster, S., Jayaram, S., and Hutton, D., 1997, “Case Studies on the Use of Virtual Reality for an Integrated Design and Manufacturing System,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4308, Sacramento, California, Atlanta, September 14–17.
Jayaram, U., Jayaram, S., Tilton, D., and Seaney, K., 1997, “An Open Architecture Framework for the Integration of Virtual Prototyping Software Tools,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4263, Sacramento, California, Atlanta, September 14–17.
Fernando, T., Wimalaratne, P., and Tan, K., 1999, “Constraint-Based Virtual Environment for Supporting Assembly and Maintainability Tasks,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9043, Las Vegas, Nevada, September 11–15.
Ellis, S. R., 1995, “Human Engineering in Virtual Environments,” Proceedings of Virtual Reality World Conference, Stuttgart, Germany, pp. 295–301.
Gupta, R., 1996, “Survey on Use of Virtual Environments in Design and Manufacturing,” Proceedings of 1996 ASME Design Engineering Technical Conference and Computers in Engineering, DETC/CIE-1348, Irvine, California, August 18–22.
Krovi, V., Kumar, V., Ananthasuresh, G. K., and Vezien, J. M., 1997, “Design and Virtual Prototyping of Rehabilitation Aids,” Proceedings of the 1997 ASME Design Technical Conference and Design for Manufacturing Conference, DETC97/DFM-4361, Sacramento, California, Atlanta, September 14–17.
Mase, T., Wang, J. T., Mayer, R., Bonello, K., and Pachcn, L., 1999, “A Virtual Bumper Test Laboratory For FMVR 581,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/DAC-8572, Las Vegas, Nevada, September 11–15.
Haug, E. J., Cremer, J., Papelis, Y., Solis, D., and Ranganthan, R., 1998, “Virtual Proving Ground Simulation for Vehicle Design,” Proceedings of the 1998 ASME Design Technical Conference and Design Automation Conference, DETC98/DAC-5626, Atlanta, Georgia, September 13–16.
Grant, P., Freeman, J. S., Vail, R., and Huck, F., 1998, “Preparation of Virtual Proving Ground for Construction Equipment Simulation,” Proceedings of the 1998 ASME Design Technical Conference and Design Automation Conference, DETC98/DAC-5614, Atlanta, Georgia, September 13–16.
Solis, D., and Schwarz, C., 1998, “Multirate Integration in Hybrid Electric Vehicle Virtual Proving Grounds,” Proceedings of the 1998 ASME Design Technical Conference and Design Automation Conference, DETC98/DAC-5634, Atlanta, Georgia, September 13–16.
Rai, S., Ramesh, P. S., and Tan, C., 1998, “Virtual Prototyping of Xerographic Components,” Proceedings of the 1998 ASME Design Technical Conference and Design Automation Conference, DETC98/CIE-5543, Atlanta, Georgia, September 13–16.
Angster, S., Gowda, S., and Jayaram, S., 1996, “Using VR for Design and Manufacturing Applications—A Feasibility Study,” In Proceedings of 1996 ASME design engineering technical conference and computers in engineering, DETC/CIE-1347, Irvine, California, August 18–22, 1996.
Jayaram, S., Angster, S. R., Gowda, S., Jayaram, U., and Kreitzer, R. R., 1998, “An Architecture for VR-based Virtual Prototyping of Human-Operated Systems,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5542, Atlanta, Georgia, September 13–16.
Jayaram, S., Jayaram, U., and Kreitzer, R., 1998, “Preserving Design Intent in Data Integration Between Virtual Prototyping and CAD Systems,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5709, Atlanta, Georgia, September 13–16.
Shahnawaz, V. J., Vance, J. M., and Kutti, S. V., 1999, “Visualization of Post-processed CFD Data in a Virtual Environment,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9042, Las Vegas, Nevada, September 11–15.
Wang, Y., Jayaram, S., Jayaram, U., Lyons, K., and Hart, P., 1999, “Representation of Swept Volumes in a Parametric CAD System Using Trajectory Information from Virtual Environments,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9109, Las Vegas, Nevada, September 11–15.
Furlong, T. J., 1997, “Virtual Reality Sculpture Using Free-Form Surface Deformation,” Proceedings of the 1997 ASME Design Technical Conference and Design for Manufacturing Conference, DETC97/DFM-4511, Sacramento, California, Atlanta, September 14–17.
Furlong, T. J., Vance, J. M., and Larochelle, P. M., 1998, “Spherical Mechanism Synthesis in Virtual Reality,” Proceedings of the 1998 ASME Design Technical Conference and Design Automation Conference, DETC98/DAC-5584, Atlanta, Georgia, September 13–16.
Furlong,  T. J., Vance,  J. M., and Larochelle,  P. M., 1999, “Spherical Mechanism Synthesis in Virtual Reality,” ASME J. Mech. Des., 121, pp. 515–520.
Evans,  P. T., Vance,  J. M., and Dark,  V. J., 1999, “Assessing the Effectiveness of Traditional and Virtual Reality Interfaces in Spherical Mechanism Design,” ASME J. Mech. Des., 121, pp. 507–514.
Yeh, T. P., and Vance, J. M., 1997, “Applying Virtual Reality Techniques to Sensitivity-based Structural Shape Design,” Proceedings of the 1997 ASME Design Technical Conference and Design Automation Conference, DETC97/DAC-3765, Sacramento, California, Atlanta, September 14–17.
Dani, T. H., Chu, C. P., and Gadh, R., 1997a, “COVIRDS: Shape Modeling in a Virtual Reality Environment,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4302, Sacramento, California, Atlanta, September 14–17.
Dani, T. H., and Gadh, R., 1997b, “A Framework for Designing Component Shapes in a Virtual Reality Environment,” Proceedings of the 1997 ASME Design Technical Conference and Design for Manufacturing Conference, DETC97/DFM-4372, Sacramento, California, Atlanta, September 14–17.
Dani, T., Wang, L., and Gadh, R., 1999, “Free-form Surface Design in a Virtual Reality Environment,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9030, Las Vegas, Nevada, September 11–15.
Gao, S., Wan, H., and Peng, Q., 1998, “Constraint-based Solid Modeling in a Virtual Reality Environment,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5544, Atlanta, Georgia, September 13–16.
Haase, H., and Preß, T., 1997, “Improved Interaction and Visualization of Finite Element Data for Virtual Prototyping,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4305, Sacramento, California, Atlanta, September 14–17.
Siddique, Z., and Rosen, D. W., 1996, “An Approach to Virtual Prototyping for Product Assembly,” In Proceedings of 1996 ASME design engineering technical conference and computers in engineering, DETC/CIE-1345, Irvine, California, August 18–22.
Bauer, M. D., and Rosen, D. W., 1997, “An Approach to Integrated Product/Process Design via Virtual Prototyping,” Proceedings of the 1997 ASME Design Technical Conference and Design Automation Conference, DETC97/DAC-3994, Sacramento, California, Atlanta, September 14–17.
Bauer, M. D., Siddique, Z., and Rosen, D. W., 1998, “A Virtual Prototyping System for Design for Assembly, Disassembly, and Service,” Proceedings of the 1998 ASME Design Technical Conference and Computers in Engineering Conference, DETC98/CIE-5539, Atlanta, Georgia, September 13–16.
Lee, D. E., and Hahn, H. T., 1997, “Generic Modular Operations for Virtual Manufacturing Process Engineering,” Proceedings of the 1997 ASME Design Technical Conference and Computers in Engineering Conference, DETC97/CIE-4309, Sacramento, California, Atlanta, September 14–17.
Lee, D. E., and Hahn, H. T., 1998, “A Temporal Process Specification Language for Virtual Manufacturing Engineering,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5535, Atlanta, Georgia, September 13–16.
Antonishek, B., Egts, D. D., and Obeysekare, U. R., 1998, “Virtual Assembly Using Two-Handed Interaction Techniques on the Virtual Workbench,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5540, Atlanta, Georgia, September 13–16.
Summers, J. D., Butler, A. C., and Kuo, E., 1999, “Development of a Feature Based Design System Using Virtual Reality,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9034, Las Vegas, Nevada, September 11–15.
Jung, B., Hoffhenke, M., and Wachsmuth, L., 1997, “Virtual Assembly with Construction Kits,” Proceedings of the 1997 ASME Design Technical Conference and Design for Manufacturing Conference, DETC97/DFM-4363, Sacramento, California, Atlanta, September 14–17.
Wan, H. G., Gao, S. M., Peng, Q. S., and Cai, Y. Y., 2003, “Optimization Techniques for Assembly Planning of Complex Models in Large-scale Virtual Environments,” International Journal of Image and Graphics, Vol. 3 , No.1.
Lawrence Associates Inc. (ed.), 1994, Virtual Manufacturing User Workshop Technical Report, 12–13 July 1994.
Mehta, B. V., Gunasekera, J. S., and Banga, R., 1999, “Virtual Material Processing (VMP) on the World Wide Web: Cold Rolling,” Proceedings of the 1999 ASME Design Technical Conference and Computers in Engineering Conference, DETC99/CIE-9028, Las Vegas, Nevada, September 11–15.
Gausemeier, J., von Bohuszewics, O., Ebbesmeyer Peter, and Grafe, M., 1998, “An Interactive Virtual Environment for the Visualization of Industrial Business Processes,” Proceedings of the 1998 ASME Design Technical Conference and Computer in Engineering Conference, DETC98/CIE-5541, Atlanta, Georgia, September 13–16.
Gausemeier, J., Krumm, H., Grafe, M., and Ebbesmeyer, P., 2001, “Design Flexible Production Systems with Virtual Reality,” Proceedings of the 2001 ASME Design Technical Conference and Computers in Engineering Conference, DETC01/CIE-21262, Pittsburgh, PA, September 9–12.
Thompson, J. R., 2000, Simulation: A Modeler’s Approach, John Wiley and Sons, Inc., New York.
Prasad, B., 1996, Concurrent Engineering Fundamentals: Integrated Product and Process Organization, Vol. 1, Prentice Hall PTR.

Figures

Grahic Jump Location
Components of a Virtual Prototype.

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In